ESA-18 MK BT Amplifier
The Dynavox ESA-18 MK BT is the successor to the E-SA18 stereo mini amplifier, which has been successful for many years. Compared to its predecessor, the device has a completely revised full metal housing with a massive 4mm front panel, slightly different dimensions and BT reception. The Dynavox ESA-18 MK BT has 2 line inputs and a microphone input. The volume and echo of the microphone input can be adjusted. Switchable loudness, record out, separate treble and bass controls as well as an auto-standby control that can be switched off (device switches off automatically after approx. 30 minutes without a signal output) complete the extensive equipment.
Technical specifications:
Perfomance: | 2 x 75W |
Frequency Response: | 20Hz - 20kHz (3dB) |
Signal to noise ratio: | > 88dB |
Input sensitivity (RCA input): | 150 mV / 300 mV (SIGNAL IN switchable Hi/Low) |
Input sensitivity (microphone input): | 3mV |
Distortion factor: | <0.1% |
Inputs: | 2 x cinch stereo, 1 x microphone jack 6.3 mm |
Outputs: | 1 x REC cinch stereo, 1 x BT, terminals for 2 speakers |
supply voltage: | 230V/ 50Hz |
Dimensions (W x H x D): | 220x50x230mm |
Color: | black silver |
Weight: | 2.1kg |
Further information in terms of the Ecodesign Directive
Power consumption in off mode <0.4 W
Power consumption in auto standby mode <0.4 W
No networked standby
mode Duration without input signal until auto standby: 15 min. (auto standby can be switched off).
The wireless network port (BT) is disabled (turned off) using the source selector switch (BT/Line).